“Big Dan” hosted a Tech Night at his new place in the NW, so we rode on over to partake in the festivities. The major event was to be the replacement of Phil’s stator which had been giving him grief for a while. Dan and Phil enlisted Louise to participate in the wrenching and I think she enjoyed it.
Here are a few pictures from the evening …
Stator goes in the big hole there.
Phil with a stator – the stator is the non-rotating part of the bike’s alternator – the thing that provides power.
While Phil’s bike was on the lift undergoing major surgery the rest of us were out in the sun chatting while I tinkered with the new intercom system wiring on Louise’s VStrom. In the picture below, Trent’s new 2013 FJR1300, (the major new redesign of my bike), is on the left.
Trent offered me a test spin on his new bike, which I eagerly took him up on! I was pretty curious as to what the real-world difference would be between the new design 2013 and my second generation 2009. First off, Trent’s bike doesn’t have the bar risers that mine does, so I couldn’t get a good sense how the ergonomics felt in comparison, but since the chassis and seat are unchanged from 2009, the risers ought to make sitting and reaching the handlebars the same. Second, it seems that the new FJR is quicker – the new engine computer and sport mapping does make a difference. With the engine in relaxed mode, it was noticeably more tame than my 2009. So the stock fixed mapping on the 2009 seems to be set between the sport mode and tame mode on the new FJR. Suspension seemed the same. The improved windscreen still needs to be a bit higher for me. Trent mentioned that he was happy with it since he’s a couple of inched shorter than I am. I didn’t take it far and I came back in a few minutes. The group was laughing because they could hear me accelerating briskly up on the main road.
I talked to Trent about a taller windscreen for the VStrom and he volunteered up the Givi he has on his VStrom for a test on the RTTH since he was taking his FJR.
We did some bench racing – that’s Trent, Richard, Dan and me, Phil’s back can be seen on the right of picture …
With Phil’s new stator installed and seemingly working fine, we all ate off the BBQ brisket he brought over for dinner – he’s an actual chef.
Dan and I took a run at mounting the really loud horn on Louise’s VStrom, but failed … again. In fact I broke the mount even more so that I can see no way now to properly mount the thing anywhere. I will buy Louise a new one and try not to screw up the mount again.
Good times these Tech Nights.